Mounted on the front (rear) bumpers of pick-ups, light trucks, off-road vehicles, agricultural vehicles, etc., it has the functions of lifting, jacking and towing. It is mainly suitable for operations on surfaces, slopes and underground engineering rescue in the fields of military & police, rescue teams, electricity engineering, hydraulic engineering, roads and bridges engineering, etc.

1. Use Q235 or high-strength aluminium alloy material;

2. The sleeves are connected by elastic pipe clamps, which is easy to deploy and retract; to prevent mud or sand from entering the structure, the design is socket-free.

3. The upper sleeve is designed to be larger than the lower sleeve so that when retracting and cleaning, mud or sand will not fall into the structure.

4. Once fully deployed, the device can be used for hoisting cargo, conducting underground rescue and engineering & rescue by cliff-side, etc.

5. When all sleeve pipes are retracted and installed back to the chassis, the device can be used for towing cargo or vehicle rescue;

6. Hoisting height ≤2.6m and hoisting capability ≤300kg;

7. The winch installed on the cargo compartment can be used to adjust the height of the handling boom; it is also equipped with a hand-cranked hoisting winch.

When the electric winch is disabled or there is a need for extra hoisting cable length, the hand-cranked can be engaged for hoisting cargo or other purposes.

The product is used to install cranes, ladders, tarpaulins, and fix binding items. It is suitable for emergency construction operations of power engineering, hydraulic engineering, construction, roads & bridges works, farms & pastures operations, etc. It can be installed on pick-ups, light trucks, vans, mini trucks, featuring simple structure, convenient deployment and easy operation.

1. Lightweight aluminium alloy, can be handled by two operators;

2. The top of the bracket can be used to place items, and maximum load bearing ≤300kg;

3. Engineering ladder can be placed on the top of the bracket for easy access;

4. Equipped with wired control handle and wireless remote control, the crane can hoist and load goods ≤300kg;

5. The top height of the bracket after being installed onto the cargo compartment of the vehicle is ≤2.2m (suitable for the driving height limit of underground parking lots and normal carriageways, such as expressways);

6. Optional trap cover for protection against wind and rain.

Mounted on the rear bumper of a pick-up, the installation position is connected to the chassis beam, and it can also be connected to the square socket of a trailer. It uses the on-board 12V power supply to hoist cargo weighing ≤300kg, operable by one person. Mainly suitable for power engineering, hydraulic engineering, construction, roads & bridges works, farms & pastures operations, repair & maintenance industry, etc.

Features:

1. The column and boom are made of heat-treated aluminium alloy, which can be used by single operator or even a female operators;

2. Equipped with wire control handle and wireless remote control, for automatic boom lifting;

3. It can lift cargo up to 300kg, and handling range is within 1.25m radius;

4. The column can be rotated 350 degrees, and the cargo can be easily placed in the cargo compartment;

5. It can be deployed on other supporting points for lifting cargo and underground engineering operations, etc.;

6. Connected to the beam from the rear bumper of a pick-up, which ensures safety and reliability, and can also be used as a rear bumper.